CONFigurable Subsystem
Also see
[CONFigurable:]IO:PULSe:WIDTh? <NRL>
[CONFigurable:]IO:PULSe:WIDTh? <NRL>[, ]
[MINimum|MAXimum|DEFault]
This command is used to query the pulse width of the specified pin.
Group
CONFigurable
Syntax
[CONFigurable:]IO:PULSe:WIDTh? <NRL>[, ][MINimum|MAXimum|
DEFault]
Arguments
<NRL>[, ][MINimum|MAXimum|DEFault]
Default Value
None
Returns
<NRf+>
Example
IO:PULS:WIDT? 1
Also see
None
[CONFigurable:]IO:TYPE <NRL>, <CPD>
This command is used to set the specified pin function. Can be set to the first
function and the second function: the default first functions of the seven pins
Copyright © Itech Electronic Co., Ltd.
51
To Next Page
Loading...
