ITech IT8000 Series Programming Guide

INITiate Subsystem
Also see
None
INITiate[:IMMediate]:ARB
Initiates the ARB trigger system.
Group
INITiate
Syntax
INITiate[:IMMediate]:ARB
Arguments
None
Default Value
None
Returns
None
Example
INIT:ARB
Also see
None
INITiate:CONTinuous:ARB <Bool>
This command is used to enable or disable the ARB continuous trigger function.
Use occasion: Single-waveform mode, when a trigger signal is received, a
waveform output is generated.
Copyright © Itech Electronic Co., Ltd.
37

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English