SOURce Subsystem
Arguments
<NRf+>
MINimum|MAXimum|DEFault|<value>
Setting range: MIN~MAX
Default Value
None
Example
CURR:SLEW:NEG 1
Query Syntax
[SOURce:]CURRent:SLEW:NEGative?
Returns
<NRf+>
12.8 [SOURce:]CURRent[:OVER]:PROTection:
STATe <Bool>
Enable or disable overcurrent protection. If the overcurrent protection function is
enabled and the input enters a current limit, the input is disabled.
Group
SOURce
Syntax
[SOURce:]CURRent[:OVER]:PROTection:STATe <Bool>
Arguments
<Bool>
0|OFF|1|ON
Copyright © Itech Electronic Co., Ltd.
128
To Next Page
Loading...
