IEEE-488 Common Commands
16 IEEE-488 Common Commands
IEEE-488 Common commands generally control overall instrument functions,
such as reset, status, and synchronization. All common commands consist of a
three-letter mnemonic preceded by an asterisk: *RST *IDN? *SRE 8.
*CLS
Clear Status Command. Clears the event registers in all register groups. Also
clears the status byte and error queue. If *CLS immediately follows a program
message terminator (<NL>), then the output queue and the MAV bit are also
cleared.
Group
None
Syntax
*CLS
Arguments
None
Default Value
None
Returns
None
Example
*CLS
Also see
None
Copyright © Itech Electronic Co., Ltd.
163
To Next Page
Loading...
Need help?
General
