IEEE-488 Common Commands
*PSC <Bool>
This instruction is used to control whether the status register is cleared when
the instrument is powered-on. This instruction affects the value of the status
register at the next powered-on.
Group
None
Syntax
*PSC <Bool>
Arguments
<Bool>
0|OFF|1|ON
Default Value
0|OFF
Returns
None
Example
*PSC 1
Also see
*PSC?
*PSC?
This instruction is used to query whether the status register is cleared when the
instrument is powered-on.
Group
None
Copyright © Itech Electronic Co., Ltd.
178
To Next Page
Loading...
