ITech IT8000 Series

SYSTem Subsystem
SYSTem:COMMunicate:LAN:IP[:CONFiguration]
<SPD>
This command is used to set the IP address of the instrument.
Group
System
Syntax
SYSTem:COMMunicate:LAN:IP[:CONFiguration] <SPD>
Arguments
<SPD>
Default Value
"192.168.0.10"
Returns
None
Example
SYST:COMM:LAN:IP "192.168.0.11"
Also see
SYSTem:COMMunicate:LAN:IP[:CONFiguration]?
SYSTem:COMMunicate:LAN:IP[:CONFiguration]?
This command is used to query the IP address of the instrument.
Group
System
Syntax
SYSTem:COMMunicate:LAN:IP[:CONFiguration]?
Copyright © Itech Electronic Co., Ltd.
28