IEEE-488 Common Commands
Syntax
*IDN?
Arguments
None
Default Value
None
Returns
<AARD>
Example
*IDN?
Also see
None
*OPC
Sets the OPC (operation complete) bit in the standard event register. This oc-
curs at the completion of the pending operation.
• The purpose of this command is to synchronize your application with the
instrument.
• Used in conjunction with initiated acquisitions, transients, output state
changes, and output settling time to provide a way to poll or interrupt the
computer when these pending operations complete.
• Other commands may be executed before the operation complete bit is set.
Group
None
Syntax
*OPC
Copyright © Itech Electronic Co., Ltd.
167
To Next Page
Loading...
