SYSTem Subsystem
Also see
None
SYSTem:COMMunicate:LAN:SMASk <SPD>
This command is used to set the subnet mask.
Group
System
Syntax
SYSTem:COMMunicate:LAN:SMASk <SPD>
Arguments
<SPD>
Default Value
"255.255.255.0"
Returns
None
Example
SYST:COMM:LAN:SMAS "255.255.255.1"
Also see
SYSTem:COMMunicate:LAN:SMASk?
SYSTem:COMMunicate:LAN:SMASk?
This command is used to query the subnet mask of the LAN communication.
Group
System
Copyright © Itech Electronic Co., Ltd.
31
To Next Page
Loading...
