ITech IT8000 Series

SOURce Subsystem
Arguments
<CPD>
VOLTage|CURRent|POWer|RESistance|CVCC|CRCC|CVCR|AUTO
Default Value
CURRent
Example
[SOUR:]FUNC VOLT
Query Syntax
[SOURce:]FUNCtion?
Returns
VOLTage|CURRent|POWer|RESistance|CVCC|CRCC|CVCR|AUTO
12.2 [SOURce:]LOOP:SPEed <CPD>
This command is used to set the loop speed of the load.
Group
SOURce
Syntax
[SOURce:]LOOP:SPEed <CPD>
Arguments
<CPD>
HIGH|LOW
Default Value
HIGH
Copyright © Itech Electronic Co., Ltd.
123