ITech IT8000 Series - Load Function; UVP (Undervoltage Protection)

CONFigurable Subsystem
Syntax
[CONFigurable:]IO:OUTPut:LEVel <NRL>, <CPD>
Arguments
<NRL>, <CPD>
0 to 6, 0|LOW|1|HIGH
Default Value
0, 1
Returns
None
Example
IO:OUTP:LEV 1, 0
Also see
[CONFigurable:]IO:OUTPut:LEVel? <NRL>
[CONFigurable:]IO:OUTPut:LEVel? <NRL>
This command is used to query the output of the specified pin is a high level or
a low level.
Group
CONFigurable
Syntax
[CONFigurable:]IO:OUTPut:LEVel? <NRL>
Arguments
<NRL>
0 to 6
Copyright © Itech Electronic Co., Ltd.
58