CONFigurable Subsystem
[CONFigurable:]IO:PWM:FREQuency? <NRL>[, ]
[MINimum|MAXimum|DEFault]
This command is used to query the PWM frequency of the specified pin.
Group
CONFigurable
Syntax
[CONFigurable:]IO:PWM:FREQuency? <NRL>[, ][MINimum|MAXimum|
DEFault]
Arguments
<NRL>[, ][MINimum|MAXimum|DEFault]
Default Value
None
Returns
<NRf+>
Example
IO:PWM:FREQ? 1
Also see
None
[CONFigurable:]IO:PWM:DUTY <NRL>, <NR1>
This command is used to set the PWM duty cycle of the specified pin.
Group
CONFigurable
Copyright © Itech Electronic Co., Ltd.
48
To Next Page
Loading...
