ITech IT8000 Series Programming Guide

IEEE-488 Common Commands
SCPI Commands *RST Initial Settings
CURRent:TRIGgered 0
FUNCtion VOLTage
INITialize:CONTinuous:TRANsient OFF
OUTPut OFF
OUTPut:DELay:FALL 0
OUTPut:DELay:RISE 0
OUTPut:PROTection:WDOG OFF
OUTPut:PROTection:WDOG:DELay 60
RESistance 0
RESistance:STATe 0
TRIGger:ACQuire:CURRent 0
TRIGger:ACQuire:CURRent:SLOPe POSitive
TRIGger:ACQuire:SOURce BUS
TRIGger:ACQuire:TOUTput OFF
TRIGger:ACQuire:VOLTage 0
TRIGger:ACQuire:VOLTage:SLOPe POSitive
TRIGger:ARB:SOURce BUS
TRIGger:TRANsient:SOURce BUS
VOLTage 1% of rating
VOLTage:LIMit 1% of rating
VOLTage:MODE FIXed
VOLTage:PROTection 120% of rating
VOLTage:RESistance 0
VOLTage:RESistance:STATe OFF
VOLTage:SLEW MAX
VOLTage:SLEW:MAXimum ON
Copyright © Itech Electronic Co., Ltd.
170

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English