JDS Uniphase HST-3000 - Page 119

Chapter 3 Ethernet Testing
OAM service and link layer testing
HST-3000 Ethernet Testing User’s Guide
97
CCM Type
(non MAC-in-MAC applica-
tions only)
Select one of the follow-
ing:
– Unicast. Select Uni-
cast to send CCMs to
its destination
address.
– Multicast. Select Mul-
ticast to send CCMs to
a reserved multicast
MAC address.
This setting does not
appear when running
Mac-in-Mac applications.
MEG End ID Specify the Maintenance
Entity Group End Point ID
for the instrument.
The instrument encodes
the ID that you specify in
the CCMs that it sends to
its peer.
Peer MEG End ID Specify the Maintenance
Entity Group End Point ID
for the instrument’s peer.
The instrument uses the
peer ID that you specify to
indicate whether CCMs
are detected with unex-
pected MEG End Point
IDs.
MD Level Specify the level for the
Maintenance Domain
(MD).
The instrument uses the
level that you specify to
indicate whether CCMs
for unexpected lower lev-
els are detected in the
traffic stream.
Setting Parameters