Chapter 3 Ethernet Testing
MAC-in-MAC testing
110
HST-3000 Ethernet Testing User’s Guide
3 Use the right arrow to go to the Filter - Backbone Frame
configuration menu, and then specify the following:Use
Setting Parameters
B-Tag VLAN ID Enter the VLAN ID car-
ried in the filtered traffic,
or use the Don’t Care but-
ton to analyze all received
traffic irrespective of the
VLAN ID.
B-Tag Priority Enter the priority carried in
the filtered traffic, or use
the Don’t Care button to
analyze all traffic irrespec-
tive of the priority.
B-Tag DEI Bit Indicate whether you want
to analyze traffic that is
Drop Eligible or Not Drop
Eligible, or select Don’t
Care to analyze all traffic
irrespective of the DEI Bit.
I-Tag Priority Enter the priority ID car-
ried in the filtered traffic,
or use the Don’t Care but-
ton to analyze all traffic
irrespective of the priority.
I-Tag DEI Bit Indicate whether you want
to analyze traffic that is
Drop Eligible or Not Drop
Eligible, or select Don’t
Care to analyze all traffic
irrespective of the DEI Bit.
I-Tag UCA Bit Indicate whether you want
to analyze traffic that uses
a customer address, does
not use a customer
address, or select Don’t
Care to analyze all traffic
irrespective of the UCA
Bit.
To Next Page
Loading...
