Chapter 4 IP Testing
Configuring layer 3 IP tests
152
HST-3000 Ethernet Testing User’s Guide
4 If you need to specify other settings for the test, use the
left and right arrow keys to go to the appropriate configu-
ration menu; otherwise, press the Home key to return to
the Summary Results screen.
The unit is configured to analyze received traffic satisfying the
layer 3 IPv6 filter criteria.
Address Filter – To analyze traffic com-
ing from a single direc-
tion on the circuit,
select
Single Direction.
– To analyze traffic from
either direction on the
circuit, select
Either Direction.
Packets with either a
source address or
destination address
that matches the
address you specified
as the Source IP filter
will be analyzed.
Traffic Class Type – To analyze received
packets irrespective of
their traffic class,
select Don’t Care.
– To analyze packets for
a specific traffic class,
select Traffic Class,
and then enter a num-
ber representing the
class using a hexa-
decimal format rang-
ing from 0x0 to 0xFF.
Setting Parameters
To Next Page
Loading...
