Chapter 4 IP Testing
Running Traceroute
160
HST-3000 Ethernet Testing User’s Guide
Yes Yes Destination Name
(if Destination Type is Host
Name)
Type the name for the destina-
tion host using up to 255 char-
acters. For example, if the
destination host is Yahoo, type
“www.yahoo.com”.
Yes No Time To Live Specify the time after which a
ping request or response can
be deleted by any device on a
circuit as a number of hops.
The default time to live setting
is 64 hops.
Yes No TOS/DSCP Select one of the following:
– Type of Service, then enter
a number representing the
type of service in a binary
format
– DSCP, then select a name.
No Yes Traffic Class Enter a number representing
the traffic class using a hexa-
decimal format ranging from
0x0 to 0xFF.
No Yes Flow Label If you are certain the routers on
the circuit support flow labels
for traffic prioritization, specify
the flow label using a hexideci-
mal format ranging from 0x0 to
0xFFFFF; otherwise, use the
default (0x0).
No Yes Hop Limit Specify the time after which a
packet can be deleted by any
device on a circuit as a number
of hops. The default Hop Limit
setting is 64 hops.
Yes Yes Response Time (s) Enter the time (in seconds) the
HST will wait to receive a
response from a hop.
IPv4 IPv6 Setting Parameters
To Next Page
Loading...
