Appendix A Test Results
OAM results
288
HST-3000 Ethernet Testing User’s Guide
Table 31 describes the Link Layer OAM States results.
Results are provided for the OAM discovery process and for
remote events. The Link OAM State must be On to observe
these results.
Table 31 L-OAM States test results
State Result Description
Discovery State Displays one of the following:
– FAULT
– ACTIVE SEND LOCAL
– PASSIVE WAIT
– SEND LOCAL REMOTE
Local Displays one of the following:
– 0 = Discovery can not complete
– 1 = Discovery has not completed
– 2 = Discovery has completed
– 3 = Reserved
Remote Displays one of the following:
– 0 = Discovery can not complete
– 1 = Discovery has not completed
– 2 = Discovery has completed
– 3 = Reserve
Remote Event Link Fault Indicates whether a link fault occurred.
Dying Gasp Indicates whether an unrecoverable
failure has occurred.
Critical Event Indicates whether a critical event has
occurred.
To Next Page
Loading...
