FX-3R Maintenance Guide
12-13
6) The “Internet Protocol (TCP/IP) (Properties)” dialog appears on the screen.
Check the “Use the following IP address” radio button.
Set the “IP address,” “Subnet mask”.
If your company determines the rules about IP address setup, you must follow the instructions
given by the network administrator of your company.
If no rules are specified, set an IP address, which has not been set in other FX-3 connected to
the HLC. In this description, set [ 111.111.111.111 ].
Additionally, input [ 255.255.255. 0 ] to [Subnet Mask].
If necessary, set the "Default gateway", "DNS", "WINS address", and other items following the
instructions given by the network administrator of your company.
0
After setting, select the [OK] button.
Rev. 1.00
To Next Page
Loading...
