Checking the seat belt
Procedure
• Check the attachment points for wear and damage.
• Check the cover for damage.
• Pull the belt out fully from the retractor and check for damage (loose seams,
fraying and nicks).
• Test the belt buckle and make sure the belt returns correctly into the retractor.
Check the automatic locking system
Procedure
• Park the truck on a level surface.
• Jerk the seat belt out suddenly.
Z
The locking system should prevent the belt from coming out.
The seat belt has now been checked.
128
04.19 en-GB
To Next Page
Loading...
Need help?
General
