5.1 Prior to decommissioning
Procedure
• Thoroughly clean the truck, see page 340.
• Prevent the truck from rolling away accidentally.
• Check the hydraulic oil level and replenish if necessary, see page 346.
• Apply a thin layer of oil or grease to any non-painted mechanical components.
• Lubricate the truck according to the lubrication schedule, see page 328.
• Charge the battery, see page 78.
• Disconnect the battery, clean it and grease the terminals.
Z
In addition, follow the battery manufacturer’s instructions.
352
04.19 en-GB
To Next Page
Loading...
Need help?
General
