2.1 Lifting by crane with mast assembled
Item Component
80 Support to protect the crane slings from sharp edges
WARNING!
Crane slings can tear, resulting in accidents
Crane slings can tear when routed over sharp edges, causing the load to fall.
u
Do not route the crane lifting gear over sharp edges. If this is not possible, protect
the crane lifting gear with suitable supports such as foam.
u
Lifting slings should be fastened to the harness in such a way that they do not
come into contact with any parts of the truck when it is being raised.
Safe lifting of the basic truck by crane with the mast assembled
Requirements
– Park the truck securely, see page 191.
– Remove the battery from the truck's battery compartment, see page 82.
Tools and Material Required
– Crane slings, for capacity details refer to the truck data plate.
– A ladder if necessary.
52
04.19 en-GB
To Next Page
Loading...
Need help?
General
