8.3
Telescopic forks (o)
WARNING!
Accident risk from increased tipover hazard and reduced residual capacity
There is a greater risk of tipover with extended telescopic attachments.
u
Do not exceed the maximum loads specified on the capacity plate.
u
Only use the telescopic function for stacking and retrieving.
u
Retract the telescopic attachment fully during transport.
u
Adapt the travel speed to changed load centre of gravity.
WARNING!
A faulty attachment can be hazardous
Check the attachment daily for external signs of damage or defects. Faulty
attachments can cause the load to fall.
u
Report any defects immediately to your supervisor.
u
Tag out and decommission a faulty lift truck.
u
Only return the truck to service when you have identified and rectified the fault.
Z
Maintenance intervals are specified in the section Maintenance, Inspection and
Changing of Maintenance Parts Requiring Replacement, see page 357.
Telescopic fork description
Telescopic forks are used to achieve a greater
stacking depth (single telescopic forks) or double-
deep storage (double telescopic forks).
254
04.19 en-GB
To Next Page
Loading...
Need help?
General
