6.4
Travel cutout override (o)
WARNING!
The truck can cause accidents
The travel cut out is an auxiliary function to assist the operator. However, it does not
release him from his responsibility to monitor the braking functions – for example
braking at the aisle end or in front of an obstacle and the initiation of braking, etc. –
and to initiate braking if necessary.
u
When the travel cutout has been de-activated the truck must be operated with
extra care in order to avoid colliding with obstacles.
u
Stop travelling before you reach the obstacle.
Z
The “travel cut-out override" symbol (182) lights up in the driver's display when the
travel function has been disabled after lifting beyond a certain lift height or range. If,
however, the the truck needs to be repositioned with respect to the rack in order to
stack or retrieve a load, proceed as follows:
215
04.19 en-GB
To Next Page
Loading...
