4.12 Diagonal travel
Requirements
– Prepare the truck for operation, see
page 138 or see page 139.
– Drive the truck into the narrow aisle and
establish automatic guidance, see
page 159.
Procedure
• Press the dead man's switch (20).
• Diagonal travel (simultaneous travel and
lifting/lowering) can be achieved by
pressing the "hydraulic functions" control
lever (113) and the accelerator pedal (22) simultaneously.
• To lower the load handler:
Turn the "hydraulic functions" control lever (113) anticlockwise.
• To raise the load handler:
Turn the "hydraulic functions" control lever (113) clockwise.
• To travel in load direction:
- Pushing the travel direction switch (105) to the right = travel in load direction.
- Press the accelerator pedal (22).
The travel speed is governed by the accelerator pedal (22).
• To travel in drive direction:
- Pushing the travel direction switch (105) to the left = travel in drive direction.
- Press the accelerator pedal (22).
The travel speed is governed by the accelerator pedal (22).
170
04.19 en-GB
To Next Page
Loading...
Need help?
General
