Leaving the narrow aisle
Procedure
• Drive the truck completely out of the
narrow aisle.
• Bring the truck to rest.
CAUTION!
You can only change from automatic to
manual steering once the truck has fully
exited the narrow aisle.
• Press the “Switch automatic guidance
on/off” button (106).
Z
The "Truck guided” display (168)
changes to the steer angle
indicator (124). The truck is now free to
move again. The steer angle
indicator (124) shows the current
position of the drive wheel.
Z
Always travel outside of narrow aisles with the load lowered.
The truck has left the narrow aisle. Use the steering wheel (5) to adjust the angle of
the drive wheel again.
169
04.19 en-GB