4.3 Preparing the truck for operation with an additional access code
(o)
Z
Optionally, the truck can be prepared for operation with an additional 5 digit access
code (from 00001 to 99999). Up to 99 different access codes can be set. The access
codes can be set by the manufacturer's customer service department. The initial
access code for new trucks is 12345.
In addition to the access code the key switch / ISM access module (o) is still used to
switch on the truck.
Z
In conjunction with the "user-specific setting" option, pre-defined travel programs and
hydraulic programs as well as various rights can be assigned to the different access
codes (see page 257).
Possible authorisation levels:
– "User" access code without change rights to user-specific settings.
– "User" access code with change rights to user-specific settings.
– "Master" access code with change rights to user-specific settings for the selected
"user" access codes.
139
04.19 en-GB
To Next Page
Loading...
Need help?
General
