Jungheinrich EFX 413 User Manual

3 Securing the truck during transport
WARNING!
Accidental movement during transport
Improper fastening of the truck and mast during transport can result in serious
accidents.
u
Loading must only be performed by specialist personnel trained for this purpose.
The specialist personnel must be instructed in securing loads on road vehicles and
handling load securing devices. In each case correct measurements must be
taken and appropriate safety measures applied.
u
The truck must be securely fastened when transported on a lorry or a trailer.
u
The lorry or trailer must have fastening rings.
u
Use wedges to prevent the truck from moving.
u
Use only fastening belts with sufficient strength.
u
Use non-slip materials to securing the load aids (pallet, wedges, ...) e. g. non-slip
mats.
3.1 Mast transport retainer
83
83
19
85
86
87
88
89
90
80
81
80
15
80
82
80
82
Item Component
80 Support to protect the fastening belt from sharp edges
WARNING!
Torn fastening belts can cause accidents
Fastening belts can tear when routed over sharp edges.
u
Do not route the fastening belts over sharp edges. If this is not possible, protect
the fastening belts with suitable supports such as foam.
u
Protect fastening belts routed over lift chains with a suitable support such as foam.
WARNING!
Improper securing during transport can result in accidents
Improper securing of the mast during transport can result in serious accidents.
u
To attach the mast to the lorry or trailer secure fastening belts on either side to at
least two different fastening rings.
60
04.19 en-GB

Jungheinrich EFX 413 Specifications

General

Brand	Jungheinrich
Model	EFX 413
Category	Trucks
Language	English