A Correct Use and Application
1 General
The truck must be used, operated and serviced in accordance with the present
instructions. All other types of use are beyond its scope of application and may result
in damage to personnel, the industrial truck or property.
2 Correct application
NOTICE
The maximum load and load distance are indicated on the capacity plate and must
not be exceeded.
The load must rest on the load handler or be lifted by an attachment approved by the
manufacturer.
The load must be fully raised,see page 199.
The following operations are in accordance with regulations and are permitted:
– Lifting, lowering and transporting of loads.
– When transporting a load outside the narrow aisle, always keep it as low as
possible allowing for ground clearance.
– Negotiating narrow aisles.
• The racking systems and the truck must be equipped to allow operation in
narrow aisles.
• The safety clearances required by the manufacturer (design safety clearance)
must be adhered to, see page 12 and see page 15.
The following operations are prohibited:
– Carrying and lifting passengers.
– Pushing or pulling loads.
– Driving on slopes and inclines.
– Driving on ramps and docks.
– Towing trailers.
– Transporting hanging loads.
– Transporting swaying loads.
11
04.19 en-GB
To Next Page
Loading...
Need help?
General
