EasyManua.ls Logo

Jungheinrich EFX 413 - Replacing the forks

Jungheinrich EFX 413
404 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.2 Replacing the forks
WARNING!
Faulty fork tines can cause accidents
Faulty fork tines can cause the load to fall.
u
Do not operate the truck with faulty forks.
u
If one fork tine is damaged, both fork tines must be replaced.
u
Report any defects immediately to your supervisor.
u
Tag out faulty forks and withdraw them from use.
CAUTION!
Injury risk when replacing forks
The forks can slide off the fork carriage when being replaced. As a result you could
injure your legs.
u
Wear personal protective equipment (e.g. safety boots etc.) when replacing the
forks.
u
Always push the forks away from your body, never towards it.
u
Secure heavy forks with lifting slings and a crane before pushing them down from
the fork carriage.
u
After replacing the forks fit the extension safety mechanism and make sure it is
seated correctly in the fork carriage.
195
04.19 en-GB

Table of Contents

Related product manuals