5.3 Restoring the truck to service after decommissioning
Procedure
• Thoroughly clean the truck, see page 340.
• Lubricate the truck according to the lubrication schedule, see page 328.
• Clean the battery, grease the terminals and connect the battery.
• Charge the battery, see page 78.
• Replace transmission oil. Condensation water could have formed.
• Replace hydraulic oil. Condensation water could have formed.
Z
The manufacturer's customer service department is specially trained to carry out
these operations.
• Start up the truck, see page 117.
WARNING!
Faulty brakes can cause accidents
As soon as the truck has been started, test the brakes several times.
u
Report any defects immediately to your supervisor.
u
Tag out and decommission the faulty industrial truck.
u
Only return the truck to service when you have identified and rectified the fault.
354
04.19 en-GB
To Next Page
Loading...
Need help?
General
