7
Personal safety system (o)
7.1 Personal Protection System (PPS)
The truck's integrated personal protection system (PSS) is designed to protect
persons. The Personal Protection System (PSS) is used with industrial trucks in
warehouse systems where pedestrians are not permitted to be in narrow aisles at
the same time as industrial trucks.
Z
The Personal Protection System meets the requirements of BGV D 27, §28
paragraph 2 and DIN 15185, Part 2 section 3.13. The Personal Protection System
complies with ISO 13849 PXF Level D for detection of persons and obstacles. The
safety laser scanner corresponds to laser protection class 1. No other measures for
screening the laser beam are required (eye protection).
The laser scanner meets the requirements of standards CDRH 21,CFR 1030.10 and
DIN EN 60825:2001.
WARNING!
Caution – exposure to hazardous radiation can result if the operating or adjusting
devices used or procedures carried out differ from those stated in the above
standards and directives.
National / international regulations apply to the assembly and use of the safety laser
scanner both for commissioning and recurrent technical inspections, in particular:
– Machinery Directive 2006/42/EG
– Use of Work Equipment Directive 89/655/EWG
– Accident prevention / health and safety regulations
– other relevant safety regulations
Z
The manufacturer and operators of the machine on which the safety laser scanner is
being used are responsible for agreeing and complying with all valid safety
regulations issued by the relevant authorities.
237
04.19 en-GB
To Next Page
Loading...
Need help?
General
