5 Order picking and stacking
5.1 Adjusting the forks
WARNING!
Unsecured and incorrectly positioned loads can cause accidents.
Before lifting a load the operator must make sure that it has been correctly palletised
and does not exceed the truck’s capacity.
u
Instruct other people to move out of the hazardous area of the truck. Stop working
with the truck if people do not leave the hazardous area.
u
Only carry loads that have been correctly secured and positioned. Use suitable
precautions to prevent parts of the load from tipping or falling down.
u
Do not transport loads other than on the authorised load handler.
u
Damaged loads must not be transported.
u
If the stacked load obscures forward visibility, then you must reverse the truck.
u
Do not exceed the maximum loads specified on the capacity plate.
u
Check the fork spread before lifting the load and adjust if necessary.
u
Insert the forks as far as possible underneath the load.
193
04.19 en-GB
To Next Page
Loading...
Need help?
General
