2.1 Working on the electrical system
WARNING!
Electrical current can cause accidents
Make sure the electrical system is voltage-free before starting work on it. The
capacitors in the controller must be completely discharged. The capacitors are
completely discharged after approximately 10 minutes. Before starting maintenance
on the electrical system:
u
Only suitably trained electricians may operate on the truck's electrical system.
u
Before working on the electrical system, take all precautionary measures to avoid
electric shocks.
u
Park the truck securely (see page 191).
u
Disconnect the battery.
u
Remove any rings, metal wrist bands etc.
2.2 Consumables and used parts
CAUTION!
Consumables and used parts are an environmental hazard
Used parts and consumables must be disposed of in accordance with the applicable
environmental protection regulations. To change the oil contact the manufacturer's
customer service department, who have been specially trained for this task.
u
Note the safety regulations when handling these materials.
320
04.19 en-GB
To Next Page
Loading...
Need help?
General
