Procedure
Z
For details of the weight of the "basic truck with mast assembled" to be taken into
account when lifting by crane, refer to the truck data plate, see page 45.
WARNING!
Using unsuitable attachment points can cause to load to fall.
When loading by crane, using the attachment point on the lift mast can cause the
basic truck to fall.
u
Only attach the crane lifting gear to the overhead guard and between the swivel
traverse frame and the truck chassis.
u
Do not attach the crane lifting gear to the lift mast.
Attach the crane lifting gear (77) to the attachment points (78,79) so that the truck
cannot slip.
• Attach the crane lifting gear (77) to both attachment points (78) on the
overhead guard (11).
• Attach the crane lifting gear (77) to both attachment points (79) between the
swivel traverse frame (25) and the truck chassis.
The truck can now be lifted.
• Raise and load the truck.
• Lower the basic truck carefully onto a level surface.
• Secure the truck with wedges to prevent it from rolling away.
Loading the basic truck by crane with the mast attached is now complete.
53
04.19 en-GB
To Next Page
Loading...
Need help?
General
