Pressing the Emergency Disconnect switch
Procedure
• Press the Emergency Disconnect (9).
All electrical functions are deactivated. The truck brakes to a halt at maximum brake
force.
Releasing the Emergency Disconnect switch
Procedure
• Turn the EMERGENCY DISCONNECT switch (9) to unlock it.
•
Trucks with ISM access module (o):
• Hold the card or transponder in front of the ISM access module and depending
on the setting press the green button on the ISM access module.
All electrical functions are enabled and the truck is operational again (assuming the
truck was operational before the Emergency Disconnect was pressed).
152
04.19 en-GB
To Next Page
Loading...
Need help?
General
