8.4.2 Variable functions in the “user-specific settings” menu
CAUTION!
Altering settings for the travel and hydraulic functions can result in accidents
Increasing the settings for travel and hydraulic functions can result in accidents.
u
Carry out a test run in a secure environment.
u
This requires greater attention on the part of the operator.
Functions Driver's display
Acceleration
Speed in apron
Speed in narrow aisle
Main-lift lifting speed
Main-lift lowering speed
Sideshift speed
8.4.3 Changing the user-specific settings
Select the "Operator-specific settings"
menu
Requirements
– Prepare the truck for operation, see
page 138 or see page 139.
Procedure
• Press the "Quit sub-menu" button (108).
The "Warnings sub-menu" item (172)
appears in the driver's display.
Z
Truck operations are inhibited in this
menu.
• Press the button (104) under the
"Warnings sub-menu" symbol (172). The
"Operator-specific settings" menu
item (199) appears in the driver's display.
• Press the button (104) under the
"Operator-specific settings"
symbol (199).
258
04.19 en-GB
To Next Page
Loading...
Need help?
General
