Procedure
• Check all fuses (249-255) in accordance with the "fuse rating" table below and
replace as required.
• Using the slotted screwdriver turn each fuse (249-255) anticlockwise out of the
controller (256).
• Pull the fuses (249-255) and their brackets out of the controller (256).
• Check the fuses (249-255) in accordance with the following table and replace
as required.
• Insert the fuses (249-255) and their brackets into the controller (256).
• Using the slotted screwdriver turn each fuse (249-255) clockwise into the
controller (256).
• Assemble the drive compartment cover, see page 334.
337
04.19 en-GB
To Next Page
Loading...
Need help?
General
