Procedure
Z
Weight of the basic truck to be taken into account, see page 35.
• Attach the crane lifting gear (77) to the attachment points (78,79) so that the truck
cannot slip.
• Attach the crane lifting gear (77) to both attachment points (78) on the
overhead guard (11).
• Attach the crane lifting gear (77) to both attachment points (79) between the
swivel traverse frame (25) and the truck chassis.
The basic truck can now be lifted.
• Raise and load the basic truck.
• Lower the basic truck carefully onto a level surface.
• Secure the basic truck with wedges to prevent it from rolling away.
Loading the basic truck by crane is now complete.
55
04.19 en-GB
To Next Page
Loading...
Need help?
General
