.
D Battery - Servicing, Recharging, Replacement 71
.
1 Safety Regulations Governing the Handling of Lead-Acid Batteries 71
1.1 General notes on handling batteries 72
2 Battery types 73
2.1 Dimensions of the battery compartment 74
3 Exposing the battery 76
4 Charging the battery 78
5 Battery removal and installation 82
6
"Battery lock" sensors (o) 86
.
E Operation 89
.
1 Safety Regulations for the Operation of the
Forklift Truck 89
2 Displays and Controls 92
2.1 Controls and displays on the control panel 92
2.2 Driver's display 97
2.3 Hourmeter 103
2.4 "Bar display" battery discharge indicator 104
2.5
"Percentage display" battery discharge indicator (o) 106
2.6 Driver's display function symbols 108
3 Preparing the Truck for Operation 117
3.1 Checks and operations to be performed before starting daily operation 117
3.2 Entry and exit 121
3.3 Setting up the operator position 122
3.4 Checking, putting on and taking off the seat belt 127
4 Industrial Truck Operation 131
4.1 Safety regulations for truck operation 131
4.2 Preparing the truck for operation 138
4.3
Preparing the truck for operation with an additional access code (o) 139
4.4 Date and time setting 143
4.5 Checks and operations to be carried out when the truck is operational 145
4.6 Main Lift referencing 147
4.7 Emergency Disconnect 151
4.8 Travel 153
4.9 Steering 157
4.10 Brakes 157
4.11 Negotiating narrow aisles 159
4.12 Diagonal travel 170
4.13 Lifting / lowering – outside and inside narrow aisles 171
4.14 Traversing / rotating outside and inside narrow aisles 175
4.15 Simultaneous traversing/rotation outside and inside narrow aisles 181
4.16 Parking the truck securely 191
5 Order picking and stacking 193
5.1 Adjusting the forks 193
5.2 Replacing the forks 195
5.3 Lifting, transporting and depositing loads 199
6 Troubleshooting 207
6.1 Troubleshooting 207
6.2 Emergency stop device 211
6.3 Load handler emergency lowering 211
6.4
Travel cutout override (o) 215
8
04.19 en-GB
To Next Page
Loading...
Need help?
General
