Juniper ACX5048 - Page 133

1. Secure the provided protective earthing terminal bracket through the ACX5000router
mounting bracket to the chassis with the nut provided. The posts on the protective
earthing terminal bracket should point to the left. See Figure 35 on page 113 and
Figure 36 on page 113.
Figure 35: Connecting a Grounding Cable to a 1 U ACX5048
Figure 36: Connecting a Grounding Cable to the 2 U ACX5096
g000834
4
8
4
9
0
1
2
3
4
5
6
7
8
9
1
0
1
1
5
0
5
1
5
2
5
3
5
4
5
5
5
6
5
7
5
8
5
9
2. Connect one end of the grounding cable to a proper earth ground, such as the rack in
which the router is mounted.
3. Place the grounding lug attached to the grounding cable over the protective earthing
terminal on the protective earthing terminal bracket.
4. Secure the grounding lug to the protective earthing terminal with two nuts.
5. Dress the grounding cable and ensure that it does not touch or block access to other
device components and that it does not drape where people could trip over it.
Related
Documentation
General Safety Guidelines and Warnings•
• Grounded Equipment Warning
• Connecting AC Power to an ACX5000 Router on page 114
• Connecting DC Power to an ACX5000 Router on page 116
113Copyright © 2015, Juniper Networks, Inc.
Chapter 11: Connecting the Router to Power