Juniper ACX5048 - Page 47

Table 10: ACX5000 Access Port and Uplink LED Locations
LocationIndicatorsPort TypeModel
g050235
Link/Activity
LED
Status
LED
Link
Status
SFP+ACX5048
Link
Status
SFP+ACX5096
Table 11 on page 27 describes how to interpret the SFP+ port LEDs.
Table 11: Network Port LEDs on SFP+ Ports on an ACX5000 Router
DescriptionStateColorLED
The port is administratively disabled, there is no power, the link
is down, or there is a fault.
OffUnlitLink/Activity
A link is established, but there is no link activity.On steadilyGreen
A link is established, and there is link activity.Blinking
The beacon is enabled on the port.BlinkingAmber
27Copyright © 2015, Juniper Networks, Inc.
Chapter 2: Chassis Components and Descriptions