Juniper EX2300-C - Table 42: SFP+ Direct Attach Copper Cable Specifications

Table 42: SFP+ Direct Attach Copper Cable Specifications
ValueSpecificationModel Number
10-Gbps full-duplex serial transmissionRateEX-SFP-10GE-DAC-1M
SFP+ passive Twinax cable assemblyConnector type
3.3 VSupply voltage
0.57 WPower consumption (per end)
–40° F (–40° C) through 185° F (85° C)Storage temperature
TwinaxCable type
30 AWGWire AWG
1 in. (2.54 cm)Minimum cable bend radius
100 ohmsCable characteristic impedance
2% maximumCrosstalk between pairs
1.31 nsec/ftTime delay
3.3 ft (1 m)Length
YesSupport for Virtual Chassis
configuration
Copyright © 2017, Juniper Networks, Inc.102
EX2300-C and EX2300 Switches Hardware Guide