Name: Juniper EX2300-C
Brand: Juniper
Rating: 5 (1 reviews)

To Next Page

To Previous Page

for connecting a switch to earth ground. Before you begin connecting a switch to earth

ground, ensure you have the parts and tools required for your switch.

Table 55: Parts and Tools Required for Connecting an EX Series Switch to Earth Ground

Additional

InformationScrewdriver

Screws and

Washers

Grounding Lug

Specifications

Grounding Cable

Requirements

Earthing

Terminal

LocationSwitch

Phillips (+)

number 2

•

Two 10-32 x .25 in.

screws with #10

split-lock washer—

not provided

•

Two #10 flat

washers—not

provided

Panduit

LCC10-14BWL or

equivalent—

not provided

14 AWG (2 mm²),

minimum 90°C

wire, or as

permitted by the

local code

Rear panel

of the

chassis

EX2200

Phillips (+)

number 2

•

Two 10-32 x .25 in.

screws with #10

split-lock washer—

not provided

•

Two #10 flat

washers—not

provided

Panduit

LCC10-14BWL or

equivalent—

not provided

14 AWG (2 mm²),

minimum 90°C

wire, or as

permitted by the

local code

Rear panel

of the

chassis

EX2300-C

Phillips (+)

number 2

•

Two 10-32 x .25 in.

screws with #10

split-lock washer—

not provided

•

Two #10 flat

washers—not

provided

Panduit

LCC10-14BWL or

equivalent—

not provided

14 AWG (2 mm²),

minimum 90°C

wire, or as

permitted by the

local code

Rear panel

of the

chassis

EX2300

See “Special

Instructions

to Follow

Before

Connecting

Earth Ground

to a Switch”

on page 158.

Phillips (+)

number 2

•

Two 10-32 x .25 in.

screws with #10

split-lock washer—

not provided

•

Two #10 flat

washers—

not provided

Panduit

LCC10-14BWL or

equivalent—

not provided

14 AWG (2 mm²),

minimum 90°C

wire, or as

permitted by the

local code

Rear panel

of the

chassis

EX3200

Phillips (+)

number 2

•

Two 10-32 x .25 in.

screws with #10

split-lock washer—

not provided

•

Two #10 flat

washers—

not provided

Panduit

LCC10-14BWL or

equivalent—

not provided

14 AWG (2 mm²),

minimum 90°C

wire, or as

permitted by the

local code

Rear panel

of the

chassis

EX3300

Phillips (+)

number 2

•

Two 10-32 x .25 in.

screws with #10

split-lock washer—

not provided

•

Two #10 flat

washers—not

provided

Panduit

LCC10-14BWL or

equivalent—

not provided

14 AWG (2 mm²),

minimum 90°C

wire, or as

permitted by the

local code

Rear panel

of the

chassis

EX3400

EX2300-C and EX2300 Switches Hardware Guide

Other manuals for Juniper EX2300-C

Quick Start2 pages

Questions and Answers:

Need help?

Do you have a question about the Juniper EX2300-C and is the answer not in the manual?

Juniper EX2300-C Specifications

General

Safety	UL-UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS EN 60950-1, CB-IEC60950-1, EN 60825-1
Form factor	1U
Product color	Black
Rack mounting	Yes
Electromagnetic compatibility	FCC 47CFR 15 A, EN 55022 A, ICES-003 A, VCCI A, AS/NZS CISPR 22 A, EN 55024, EN 300386, CE
Console port	USB
SFP+ module slots quantity	2
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	12
Number of VLANs	4093
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3u, IEEE 802.3z
Virtual LAN features	Tagged VLAN, Port-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Power consumption (max)	20 W
Memory type	DRAM
Noise level	0 dB
Flash memory	2000 MB
Processor frequency	1250 MHz
Virtual stacking (units)	4
Operating altitude	0 - 1524 m
Non-operating altitude	1524 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %
Throughput	47 Mpps
Jumbo frames	9216
MAC address table	16000 entries
DHCP features	DHCP server, DHCP client
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, HTTPS, SNMP, SSH-2
Fiber ethernet cabling technology	1000BASE-X
Switch type	Managed
Switch layer	L2/L3