Juniper EX2300-C - Table 58: Alarm Conditions on EX2300 Switches

Table 58: Alarm Conditions on EX2300 Switches
Remedy
Alarm
SeverityAlarm Condition
Chassis
Component
•
Check the fan.
•
Open a support case using the Case
Manager link at
http://www.juniper.net/support/ or
call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the United
States).
Minor
(yellow)
The temperature
inside the chassis
reaches the yellow
alarm limit.
Temperature
•
Check the fan.
•
Open a support case using the Case
Manager link at
http://www.juniper.net/support/ or
call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the United
States).
Major
(red)
The temperature
inside the chassis
reaches the red
alarm limit.
Open a support case using the Case Manager
link at http://www.juniper.net/support/
or call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the United
States).
Major
(red)
The temperature
sensor has failed.
•
Check whether a cable is connected to
the management Ethernet interface, or
whether the cable is defective. Replace
the cable if required.
•
If you are unable to resolve the problem,
open a support case using the Case
Manager link at
http://www.juniper.net/support/ or
call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the United
States).
Major
(red)
Management
Ethernet link is
down.
Management
Ethernet
interface
213Copyright © 2017, Juniper Networks, Inc.
Chapter 19: Alarms and System Log Messages