Juniper EX2300-C - Table 39: Optical Interface Support and Copper Interface Support for SFP

Table 39: Optical Interface Support and Copper Interface Support for SFP Transceivers in
EX2300 Switches
ValueSpecificationEthernet Standard
EX-SFP-1GE-TModel number1000BASE-T
10/100/1000 MbpsRate
RJ-45Connector type
CopperFiber count
–Transmitter wavelength
–Minimum launch power
–Maximum launch power
–Minimum receiver sensitivity
–Maximum input power
CopperFiber type
–Core/Cladding size
–Modal bandwidth
100 m (328 ft)Distance
Not availableDOM support
Junos OS for EX Series switches, Release 15.1X53-D50 or laterSoftware required
NoSupport for Virtual Chassis
configuration
75Copyright © 2017, Juniper Networks, Inc.
Chapter 8: Transceiver and Cable Specifications