Juniper EX2300-C - Multiple Power Supplies Disconnection Warning; TN Power Warning

respectivos cabos, e deverão prender simultaneamente o isolamento e o fio
condutor.
¡Atención! Cuando se necesite hilo trenzado, utilizar terminales para cables
homologados, tales como las de tipo "bucle cerrado" o "espada", con las
lengüetas de conexión vueltas hacia arriba. Estos terminales deberán ser del
tamaño apropiado para loscables quese utilicen, y tendrán que sujetar tanto
el aislante como el conductor.
Varning! När flertrådiga ledningar krävs måste godkända ledningskontakter
användas, t.ex. kabelsko av sluten eller öppen typ med uppåtvänd tapp.
Storleken på dessa kontakter måste vara avpassad till ledningarna och måste
kunna hålla både isoleringen och ledaren fastklämda.
Related
Documentation
General Safety Guidelines and Warnings on page 223•
• General Electrical Safety Guidelines and Warnings on page 251
• DC Power Electrical Safety Guidelines for Switches on page 256
• DC Power Disconnection Warning on page 259
• DC Power Grounding Requirements and Warning on page 260
• DC Power Wiring Sequence Warning on page 261
Multiple Power Supplies Disconnection Warning
WARNING: For a device that has more than one power supply connection,
you must ensure that all power connections are fully disconnected so that
power to the device is completely removed.
Related
Documentation
General Safety Guidelines and Warnings on page 223•
• General Electrical Safety Guidelines and Warnings on page 251
• AC Power Electrical Safety Guidelines on page 254
• DC Power Electrical Safety Guidelines for Switches on page 256
TN Power Warning
WARNING: The device is designed to work with a TN power system.
Waarschuwing Het apparaat is ontworpen om te functioneren met TN
energiesystemen.
Copyright © 2017, Juniper Networks, Inc.264
EX2300-C and EX2300 Switches Hardware Guide