The Gigabit Ethernet SFP and SFP+ transceivers installed in EX2300 switches support
digital optical monitoring (DOM): You can view the diagnostic details for these transceivers
by issuing the operational mode CLI command show interfaces diagnostics optics.
NOTE: The transceiverssupport DOMevenif theyare installedin uplink ports
configured as Virtual Chassis ports.
The tables in this topic describe the optical interface support over single-mode fiber-optic
(SMF) and multimode fiber-optic (MMF) cables and over the copper interface for SFP
and SFP+ transceivers:
•
Table 39 on page 75—Optical interface support and copper interface support for SFP
transceivers in EX2300 switches.
•
Table 40 on page 94—Optical interface support for SFP+ transceivers in EX2300
switches.
Copyright © 2017, Juniper Networks, Inc.74
EX2300-C and EX2300 Switches Hardware Guide