Juniper EX2300-C Hardware Guide

Table 60: Filtering System Log Messages (continued)
Your ActionFunctionField
To reset the field values that are listed in
the Events Filter box, click Reset.
Resets all the fields in the Events Filter box.Reset
To generate a raw report:
1. Click Generate Raw Report.
The Opening filteredEvents.html
window appears.
2. Select Open with to open the HTML file
or select Save File to save the file.
3. Click OK.
Generates a list of event log messages in
nontabular format.
Generate Raw Report
NOTE:
• Starting in Junos OS Release
14.1X53, a Raw Report can be
generated from the log
messages being loaded in the
Events Detail table.The
Generate Raw Report button
is enabled after the event log
messages start loading in the
Events Detail table.
• After the log messages are
completely loaded in the
Events Detail table, Generate
Raw Report changes to
Generate Report.
To generate a formatted report:
1. Click Generate Report.
The Opening Report.html window
appears.
2. Select Open with to open the HTML file
or select Save File to save the file.
3. Click OK.
Generates a list of event log messages in
tabular format, which shows system details,
events filter criteria, and event details.
Generate Report
NOTE: Starting in Junos OS
Release 14.1X53, a Formatted
Report can be generated from
event log messages being
loaded in an Events Detail
table.The Generate Report
button appears only after event
log messages are completely
loaded in the Events Detail table.
The Generate Raw Report
button is displayed while event
log messages are being loaded.
Meaning Table 61 on page 218 describes the Event Summary fields.
NOTE: By default, the View Events page in the J-Web interface displays the
most recent 25 events, with severity levels highlighted in different colors.
After you specify the filters, Event Summary displays the events matching
the specified filters. Click the First, Next, Prev, and Last links to navigate
through messages.
217Copyright © 2017, Juniper Networks, Inc.
Chapter 19: Alarms and System Log Messages

Juniper EX2300-C Specifications

General

Safety	UL-UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS EN 60950-1, CB-IEC60950-1, EN 60825-1
Form factor	1U
Product color	Black
Rack mounting	Yes
Electromagnetic compatibility	FCC 47CFR 15 A, EN 55022 A, ICES-003 A, VCCI A, AS/NZS CISPR 22 A, EN 55024, EN 300386, CE
Console port	USB
SFP+ module slots quantity	2
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	12
Number of VLANs	4093
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3u, IEEE 802.3z
Virtual LAN features	Tagged VLAN, Port-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Power consumption (max)	20 W
Memory type	DRAM
Noise level	0 dB
Flash memory	2000 MB
Processor frequency	1250 MHz
Virtual stacking (units)	4
Operating altitude	0 - 1524 m
Non-operating altitude	1524 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %
Throughput	47 Mpps
Jumbo frames	9216
MAC address table	16000 entries
DHCP features	DHCP server, DHCP client
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, HTTPS, SNMP, SSH-2
Fiber ethernet cabling technology	1000BASE-X
Switch type	Managed
Switch layer	L2/L3

Weight and Dimensions

Depth	239 mm
Width	279 mm
Height	44 mm
Weight	2480 g