Juniper EX2300-C Hardware Guide

Table 4: CLI Equivalents of Terms Used in Documentation for EX2300 Switches (continued)
Additional
Information
Item in
Documentation
Value (as
Displayedin
the CLI)
Description (as Displayed in the
CLI)
Hardware Item (as
Displayed in the
CLI)
Understanding
Interface Naming
Conventions on EX
Series Switches
The switch does not
have actual FPCs. In
this case, FPC refers
to the switch itself.
Value of n is
always 0.
Abbreviated name of the Flexible PIC
Concentrator (FPC)
One of the following:
•
EX2300-C-12T
•
EX2300-C-12P
•
EX2300-24T
•
EX2300-24P
•
EX2300-24T-DC
•
EX2300-48T
•
EX2300-48P
FPC (n)
Understanding EX
Series Virtual Chassis
Components
In this case, the FPC
number refers to the
member ID assigned
to the switch.
n is a value in
the range of
0 through 3.
On EX2300 Virtual Chassis:
•
Member ID of the switch within the
Virtual Chassis
Understanding
Interface Naming
Conventions on EX
Series Switches
The switch does not
have actual PIC
devices; see entries
for PIC 0 through PIC
1 for the equivalent
item on the switch
n is a value in
the range 0
through 1.
Abbreviated name of the Physical
Interface Card (PIC)
PIC (n)
“EX2300 Switches
Hardware Overview”
on page 3
Built-in RJ-45
network ports on the
front panel of the
switch
PIC 0One of the following:
•
12x 10/100/1000 BASE-T
•
24x 10/100/1000 BASE-T
•
48x 10/100/1000 BASE-T
“EX2300 Switches
Hardware Overview”
on page 3
Built-in uplink ports
on the front panel of
the switch
PIC 1One of the following:
•
2x10G SFP/SFP+
or
•
4x10G SFP/SFP+
“Pluggable
Transceivers
Supported on
EX2300 Switches”
on page 73
Optical transceiversn is a value
equivalent to
the number
of the port in
which the
transceiver is
installed.
Abbreviated name of the transceiverXcvr (n)
“Power Supply in
EX2300 Switches”
on page 27
AC power supply or
DC power supply
Value of n is
always 0.
Built-in power supplyPower Supply (n)
13Copyright © 2017, Juniper Networks, Inc.
Chapter 1: System Overview

Juniper EX2300-C Specifications

General

Safety	UL-UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS EN 60950-1, CB-IEC60950-1, EN 60825-1
Form factor	1U
Product color	Black
Rack mounting	Yes
Electromagnetic compatibility	FCC 47CFR 15 A, EN 55022 A, ICES-003 A, VCCI A, AS/NZS CISPR 22 A, EN 55024, EN 300386, CE
Console port	USB
SFP+ module slots quantity	2
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	12
Number of VLANs	4093
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3u, IEEE 802.3z
Virtual LAN features	Tagged VLAN, Port-based VLAN
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Power consumption (max)	20 W
Memory type	DRAM
Noise level	0 dB
Flash memory	2000 MB
Processor frequency	1250 MHz
Virtual stacking (units)	4
Operating altitude	0 - 1524 m
Non-operating altitude	1524 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %
Throughput	47 Mpps
Jumbo frames	9216
MAC address table	16000 entries
DHCP features	DHCP server, DHCP client
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, HTTPS, SNMP, SSH-2
Fiber ethernet cabling technology	1000BASE-X
Switch type	Managed
Switch layer	L2/L3

Weight and Dimensions

Depth	239 mm
Width	279 mm
Height	44 mm
Weight	2480 g