Juniper EX3300 Series User Manual

Related
Documentation
• Removing a Transceiver from an EX Series Switch on page 115
• Connecting a Fiber-Optic Cable to an EX Series Switch on page 103
• Optical Interface Support in EX2200 Switches
• Optical Interface Support in EX3200 Switches
• Optical Interface Support in EX3300 Switches on page 29
• Optical Interface Support in EX4200 Switches
• Optical Interface Support in EX4500 Switches
• Optical Interface Support in EX6200 Switches
• Optical Interface Support in EX8200 Switches
81Copyright © 2011, Juniper Networks, Inc.
Chapter 10: Installing Switch Components

Juniper EX3300 Series Specifications

General

Layer Support	Layer 2 and Layer 3
JUNOS OS	Yes
Ports	24 or 48 x 10/100/1000BASE-T ports
Uplink Ports	4 x 1GbE/10GbE SFP/SFP+ ports
Power Supply	AC or DC options
Stacking	Yes, up to 10 units
MAC Address Table Size	32, 000
Operating Humidity	10% to 90% non-condensing
PoE Support	Available on PoE models
Virtual Chassis	Yes, up to 10 units
Operating Temperature	32° to 104° F (0° to 40° C)